1. <menuitem id="w6hty"><dfn id="w6hty"></dfn></menuitem>
          <track id="w6hty"><span id="w6hty"></span></track>
          <track id="w6hty"></track>
            <menuitem id="w6hty"><dfn id="w6hty"></dfn></menuitem>
            All responses from TSReader's control server are prefixed with a three digit decimal number to allow easy parsing by non-human clients.

            Informational Responses

            Informational responses contain data requested of the control server and start with 2xx.

            200 The control server sign-in message - conveys TSReader version number when first connecting.
            201 Responses to the HELP or ? command
            202 Responses to the PROGRAM command without parameters. Data sent is the 5-digital decimal program number followed by either the short SDT channel name for DVB muxes or the Service Name from the TCVT for ATSC muxes. This data is repeated for each channel defined in the PAT or created with the manual channel feature. The currently selected program (if any) is indicated by an asterix at the end of the line.
            203 Responses to the SOURCE command without parameters. TSReader sends the names of the sources with the currently selected source indicated by an asterix at the end of the line.
            204 Responses to the SETVLC command without parameters. TSReader sends the VLC configuration number along with the description.
            205 Further responses to the SETVLC command without parameters. TSReader sends the VLC command for the configuration previously sent with a 204 response.
            206 Responses to the AUDIO command without parameters
            207 Responses to the RECORD command without parameters
            208 Responses to the INFO command
            209 Responses to the PIDS command
            210 Responses to the SETTING command without paramters


            Acknowledgment Responses

            These responses are returned for Control Server commands that don't include any data. These responses start with 3xx.

            300 Program specified in the PROGRAM command was sucessfully selected
            301 TERMINATE starting. This is likely to get returned but depending on the speed of the machine may not be. Monitoring the validity of this socket connection may be a better way to determine when TSReader has indeed terminated.
            302 The PLAY command is starting playback on the output specified.
            303 The STOP command is proceeding.
            304 The RECORD command is starting
            305 The VLC configuration command was updated.
            306 The record/stream audio stream has been set in response to the AUDIO command
            307 The source has been updated by the SOURCE command. Now the TUNE command should be sent to restart the source
            308 Source restarted - sent in response to the TUNE command
            309 XML or HTML has been exported sucessfully with the EXPORT command
            310 The GRAPH command was successfully completed.
            311 The STALL command completed and tables are decoded ready for EXPORT
            312 The STALL command timed-out. Tables are still being updated.
            313 THUMBNAIL command sucessful.
            314 PROGRAM command has completed.
            315 INFO command has completed.
            316 WINDOW command has completed.
            317 PIDS command has completed.
            318 The THUMBNAIL command (other than write) has completed.
            319 Graph mode has been switched to REALTIME.
            320 Graph mode has been switched to AVERAGE.
            321 Graph refresh rate has been updated.
            322 Manual channel added.
            323 SETTING has been updated successfully
            324 DISEQC sequence sent

            325
            Specified counters reset

            326
            Graph sent via control server socket

            327
            Graph saved to file
            328 XMLTV channel command completed
            329 XMLTV programme command completed
            330 Caption decoder has been started
            331 Caption decoder has been stopped
            332 Caption logging started
            333 Caption logging disabled
            334 FORWARD PIDFILTER command completed
            335
            FORWARD module activated
            336
            FORWARD module decactivated
            337
            UDPFORWARD activated
            338
            UDPFORWARD deactivated
            339
            UDPFORWARD PROGRAM completed
            340
            UDPFORWARD MUX completed
            341 Response to the TIMESYNC command
            342
            Password accepted
            343
            TSBITCOUNTER logging is disabled
            344
            TSBITCOUNTER logging is enable
            345
            SCTE-35 logging is disabled
            346
            SCTE-35 logging is enabled
            347
            The Stream Monitor has been started
            348
            The Stream Monitor has been stopped
            349
            The Stream Monitor status has been sent
            350
            Any unreported Stream Monitor errors have been sent
            351
            Start of the TIMING data
            352
            End of the timing data


            Error Responses

            These Control Server responses commence with either 5xx or 6xx and indicate an error in the command syntax or TSReader state.

            500 Unrecognized command was sent
            501 Invalid program number specified in the PROGRAM command
            502 Program number specified doesn't exist in the current mux
            503 TERMINATE command not complete
            504 TERMINATE command-sequence incorrect - you didn't specify xyzzy on the TERMINATE command
            505 PLAY command incomplete - must include the output device
            506 Already playing - TSReader is currently playing a service - the STOP command should be issued before a new PLAY command.
            507 No program was selected for playback/record - the PROGRAM command should be use to set the channel to playback or record.
            508 The output device in the PLAY command is incorrect.
            509 The STOP command is ignored because recording or playback is not currently active
            510 No filename was specified for the RECORD command
            511 Record mode was not valid. Current record options are ALL and PROGRAM
            512 No parameters for the EXPORT command
            513 No filename given for the EXPORT command
            514 EXPORT mode was not valid. Current export options are HTML, XML and XMLTV
            515 VLC configuration number incorrect in the SETVLC command.
            516 Invalid audio track specified in the AUDIO command
            517 Recording is not currently active (response to the RECORD with no paramters command)
            518 Unable to locate the source name specified in the SOURCE command
            519 The source name specified in the SOURCE command doesn't refer to a valid TSReader source file.
            520 Unable to open the specified file for the EXPORT command
            521 No parameters were specified in the TUNE command. Even if the source doesn't take any parameters (like the Linear Systems ASI card), you still need a space after the TUNE command.
            522 The source rejected the parameters specified in the TUNE command.
            523 No parameters were specified on the GRAPH command.
            524 The GRAPH mode parameter is incorrect.
            525 The STALL command is missing parameters.
            526 The STALL timeout is incorrect.
            527 The parameters on the HELP command-line aren't recognized.
            528 No parameters specified in the THUMBNAIL command
            529 No filename specified in the THUMBNAIL command
            530 Invalid program number range in the THUMBNAIL command (valid range is 1 through 65535)
            531 Invalid program number for the THUMBNAIL command (program is not present in the current mux)
            532 No video thumbnail exists for the program (THUMBNAIL command)
            533 There was a problem writing the thumbnail file specified.
            534 No parameters specified for the INFO command
            535 INFO command mode incorrect.
            536 No parameters specified for the WINDOW command.
            537 WINDOW command parameter incorrect.
            538 No refresh rate provided with the GRAPH REFRESH command.
            539 Channel number or PCR PID incorrect for MANUALCHANNEL.
            540 No parameters specified with MANUALCHANNEL.
            541 Invalid program number for MANUALCHANNEL.
            542 Channel already exists.
            543 Invalid PCR PID for MANUALCHANNEL.
            544 Invalid elementary stream parameters in MANUALCHANNEL.
            545 No elementary streams were specified with the MANUALCHANNEL command.
            546 Too many channels defined.
            547 SETTING subparameter or value missing
            548 SETTING true/false setting incorrect
            549 SETTING subparameter incorrect
            550 Source doesn't support DiSEqC positioner commands
            551 Source doesn't contain a DiSEqC entry-point
            552 No parameters for the DISEQC command
            553 Invalid DiSEqC sequence
            554 No DiSEqC message found
            555 No counters reset mask specified
            556 No RESET value specified
            557 No graphs currently active
            558 Graph PNG filename wasn't spciefied
            559 No XMLTV parameters
            560 XMLTV channel id is misformed - needs the program-name format
            561 XMLTV programme stop time missing
            562 XMLTV programme channel missing
            563 XMLTV programme title missing
            564 XMLTV programme description missing
            565 XMLTV programme channel is misformed - needs the program-name format
            566 XMLTV command not recognized
            567 XMLTV program has no duration
            568  No parameters specified in the CAPTION command
            570 Program not selected in the CAPTION command
            571 Caption decoder can't be stopped as its not active
            572 Caption decoder log can't be enabled because the caption decoder isn't active (use CAPTION ON first)
            573 Parameters for the CAPTION LOG command are missing
            574 CAPTION LOG filename missing
            575 CAPTION LOG flags are zero - this would mean logging nothing
            576 CAPTION LOG is already active - stop with CAPTION LOG (no other parameters) and then repeat the command
            577 CAPTION command not understood (not ON, OFF or LOG)
            578
            XMLTV REMAP filename wasn't provided
            579
            XMLTV post export command not specified
            580
            An error occurred when sending a graph's PNG file over the socket
            581
            An error occurred writing a graph's PNG file
            582
            The STALL sub-command parameter wasn't understood
            583
            The FORWARD command didn't have any parameters
            584
            Not enough parameters for the FORWARD command
            585
            The forwarder module specified was not found
            586
            The forwarder can't be activated since it's already active
            587
            The forwarder module cannot be activated
            588
            The forwarder module can't be decativated since it's not already active
            589
            The forwarder module didn't deactivate
            590
            Unknown FORWARD sub-command
            591
            The UDPFORWARD command had no parameters
            592
            UDPFORWARD can't be started since it's already running
            593
            The UDP forwarder can't be stopped since it's not already running
            594
            no longer used
            595
            Invalid UDPFORWARD PROGRAM program number
            596
            UDPFORWARD PROGRAM command couldn't open the Windows registry
            597
            The UDPFORWARD MUX command cannot be used when the UDP forwarder is running
            598
            UDPFORWARD MUX command couldn't open the Windows registry
            599
            Unrecognized UDPFORWARD sub-command
            600 Problem enabling the program to forward with UDPFORWARD PROGRAM
            601
            Problem disabling the program to forward with UDPFORWARD PROGRAM
            602
            The PASSWORD command is incomplete (no password specified)
            603
            The password is incorrect
            604
            The LOG command is incorrectly formatted
            605
            Response when attempting  to turn off TSBITCOUNTER logging when its not enabled
            606
            Response when attempting to turn on TSBITCOUNTER when its already turned on
            607
            LOG TSBITCOUNTER is not followed by ON or OFF
            608
            Attempted to turn off SCTE-35 logging that's not enabled
            609
            Attemping to turn on SCTE-35 logging that's already enabled
            610
            SCTE-35 log file could not be opened
            611
            Unknown LOG mode command
            612
            No sub command sent with the STREAMMONITOR command
            613
            The Stream Monitor cannot be started because it is already running
            614
            The Stream Monitor is not running
            615
            Unknown STREAMMONITOR sub-command
            616
            No parameters for the TIMING command
            617
            The TIMING function is already active when a TIMING START command was received
            618
            The video/audio chart is active when a TIMING START command was received
            619
            The video/audio timing function was not active when a TIMING STOP command was received
            620
            Unknown TIMING sub-command

            爱如潮水小说叔嫂情第26章

                  1. <menuitem id="w6hty"><dfn id="w6hty"></dfn></menuitem>
                    <track id="w6hty"><span id="w6hty"></span></track>
                    <track id="w6hty"></track>
                      <menuitem id="w6hty"><dfn id="w6hty"></dfn></menuitem>